Publicidad
Idiomas disponibles
Idiomas disponibles
§
Electrical high power: See chart 1.
§
Operating Temperature: 0 to 55°C.
§
Non-volatile Memory to retain programmed data.
§
Registry Memory.
§
Precision range
• 0,5% for tension;
• 1, 5% for current*;
• 2% for power *.
§
feeding tension Input of: 70 to 300Vac (for a different feeding range
please get in touch).
§
tension measurement Input of 50 to 500Vac
§
current measurement Input for optional accessories:
• Adapter for CT´s 0, 05 to 5A;
• rigid Sensors (Clamp) de 10A, 20Aor200A;
• Flexible or rigid Sensors of 1000 or 2000A.
• Flexible Sensor of 3000A *.
§
feeding and measurement Electrical frequency of: 45 to 70 Hz;
§
Consumption: 10VA.
§
Serial communication port RS232 (Please get in touch with technical support for
different models).
§
Communication protocol Modbus RTU.
§
Internal battery rechargeable, with minimum autonomy of 2 months idle to retain
data.
§
Registry start by event or by starting date.
§
Internal battery Status.
§
Memory. programming status
§
Watch and calendar.
* The Precision range for current power depends on the current sensor model in use.
The specified precision range values are for the range of 25A to 1000A utilizing the
flexible 1000A sensor supplied and calibrated by the IMS with the equipment. Please
get in touch with technical support for other current sensor model, or other current
measurement ranges.
2.4. PROGRAMMABLE VARIABLES
§
Relationship of PT and CT primary and secondary.
§
Sensor model: Flexible or Clamp.
§
Connection type: delta or star.
§
Elements number: 2 or 3.
§
ANEEL Parameters.
§
Power to be registered.
§
Registry interval: 0,25s to 60min.
§
Memory kind: circular or linear.
§
Event tension up or down.
§
Watch: date and time.
§
Registry start and end date.
§
Communication speed: 9600, 19200 or 38400 bps.
§
Network address.
§
Display actualization rate.
The IMS keeps the right to modify all informations contained in this
manual without previous advice.
PowerNET P-600
:
Manual de Instalación y Operación
.
99
Publicidad
