Publicidad
Idiomas disponibles
Idiomas disponibles
when the display shows the letter f at the lower right corner press F6. When the screen
below is showed:
Allows the user to program one NUC (customer number). When configured a
NUC value, the equipment will create the registry area name with this value, in the
case that the NUC for program is "0", he utilizes the standard area name "AREA0001".
The keys "↑" and "↓" increase/decrease the value, and the keys "F1" and "F2" take the
cursor to left/right .
Press the key F3 and the screen below will show:
TN
Iniciar Registro em = Start Registry in
v Utilize the increase or decrease keys to define the value of the starting date.
v To confirm and go to the next parameter press F5.
v To leave press F6.
After configured the starting date it shows a screen with the date to stop the registry.
TN
Parar Registro em = Stop Registries in
v Utilize the increase or decrease keys to define the value da data de fim.
v To confirm and go to the next parameter press F5.
v To leave press F6.
In the memory screen a reading equal to "Programmed" indicates that the
PowerNET P-600 is configured to start the registries by data. When the equipment
stops registering, the parameters values initial year and final year get the values of the
year before the one configured in the calendar. This way the events are canceled. To
PowerNET P-600
Manual de Instalación y Operación
121
Publicidad
