Publicidad
Idiomas disponibles
Idiomas disponibles
7.12. MEMORY
Press the key Memo and will be showed the memory screen of the equipment
with the free space in memory, the registries number, the area identification and the
memory status.
TN
Espaço Livre = Free Space
Identificação da Área = Area Identification
Estado da Memória = Memory State
Número de Registros = Registries Number
v Free space: indicates how many memory bytes were not yet utilized for storage.
v Registries number: Indicates total amount registered.
v Area identification Indicates the name by which data is searched in memory
It is possible to have several areas in the PowerNET P-600 memory, not
needing to be unloaded to make a new measurement and registry, as far as he has
enough free memory. When a new area is initiated by the keyboard the name is
automatically generated in growing order (AREA001, AREA002,..., AREAXXX). In the
case of programmed NUC "0", if NUC has a value different than zero, this will be the
name of the new area. Through the ANALYZER SOFTWARE is possible to identify the
areas with other names.
v Status: Indicates the actual condition of the memory according to Chart 6.
Status
Stop
Indicates that the equipment is not registering.
Indicates that the equipment is waiting for the configured
registry interval get in agreement with the system calendar.
Synchronism
Example: for a registry interval of 5 minutes, if the time is
12:01:32 the first registry will enter at 12:05:00.
Registering
Indicates that the equipment is registering.
Indicates that the equipment is configured to start by a tension
Prog. Event
event.
Programmed Indicates that the equipment is configured to start by date.
PowerNET P-600
Installing and Operating Manual
Description
Chart 6
130
Publicidad
