Sony UPX-DP10 Manual De Instrucciones página 13

Rear
qf
qd
1 Flash mode button (60)
Selects the flash mode. Each time you press this
button, the setting changes cyclically.
A : The automatic photometry function
automatically determines the lighting conditions,
and the optimum shutter speed is selected. The
built-in strobe lights at the optimum level as
necessary. For automatic photometry, there is a
prelighting process before the actual flash.
Suitable for outdoor portrait shots.
: The built-in strobe always lights at the optimum
level determined by automatic detection. The
shutter speed is fixed at
exposure is controlled automatically. For
automatic photometry, there is a prelighting
process before the actual flash.
Suitable for indoor shots using the built-in strobe
only.
E: The built-in strobe always lights. The shutter
1
speed is fixed at /
250
controlled to be best for a subject 1.2 m away
from the lens.
Recommended when you use an external strobe in
addition to the built-in strobe. (For instance, when
you use an external strobe behind the subject to
clear shadows.)
qs
1
/ seconds and the
250
seconds and the exposure is
P L A Y
C A M
E R A
W
T
L C D
M O N
IT O R
O N
O F F
M O D
E
S E T
qa
0 9
E: The built-in strobe does not light. The shutter
speed is fixed at
Use this mode when you use an external strobe as
the main strobe.
: The built-in strobe does not light. The optimum
shutter speed is selected according to the
automatic photometry performed in advance.
Recommended when you use a video light.
: Prelighting is repeated several times before the
actual flash. This moderates the red eye
phenomena caused by a flash. Other operations
are the same as with A .
2 H/S (picture resolution mode) button (65)
Selects the picture quality. Each time you press the
button, the setting changes cyclically:
S: High-resolution mode (VGA: 640 × 480).
Sixty or more pictures can be stored.
Hi1: Super-high-resolution 1 mode (SXGA: 1280 ×
960). Ten or more pictures can be stored. The
data compression rate is lower than with Hi-2
mode.
Hi2: Super-high-resolution 2 mode (SXGA: 1280 ×
960). Twenty or more pictures can be stored.
1
2
3
4
5
6
7
8
1
/ seconds.
250
13