Station - Sony UPX-DP10 Manual De Instrucciones

Locations of Parts

Station

qd
qs
1 Camera attachment part (39)
Attach the camera here.
2 Metal contacts
For connection with the camera. Always keep them
clean. If they become dirty, clean them with a cotton
swab, etc.
3 POWER/BUSY lamp (55)
Lights in green when the connected printer is turned
on. Blinks in red while image data is being transmitted
from the camera to the station. Do not remove the
camera from the station while this lamp is blinking in
red.
4 PRINT button (55)
Press to print the image selected on the camera.
5 SPLIT button (54, 77)
Select the type of printout: a full-sized image or a split
reduced-image printout.
The split specifications vary with the intended
markets. A cursor indicates the current selection on the
LCD. The selection is retained in memory even after
the power is turned off.
16
PRINTER DC IN
qf qg
C A M
E R A
1 2
6 B/W COL button (54)
Select B/W (black and white) or COL (color) for a
printout. A cursor indicates the current selection on
the LCD. The selection is retained in memory even
after the power is turned off.
7 Liquid-crystal display (LCD) (55)
Displays adjustment items in the menu operation and
settings of the B/W COL and SPLIT buttons.
8 BATTERY CHARGE button (21)
Press to charge the large battery installed in the camera
with the POWER switch of the camera set to OFF. To
cancel charging, remove the camera from the station or
turn off the power to the station.
9 EXEC (execute) button (56, 69)
Press to store the values set in the menu operation.
The LOCK function hides some of the menu items. To
enable the LOCK function, hold down the EXEC
button for three seconds or longer while not operating
the menu. To release the lock, hold down the EXEC
button for three seconds or longer again.
3
4
5
6
7
8
9
0
qa