Sony UPX-DP10 Manual De Instrucciones página 37

Station
PRINTER DC IN
DC IN
Ferrite filter
Connecting the camera to a wall outlet
2
Connect the DC cord of the AC power adaptor to the DC IN connector
of the station.
PCS-AC80
AC power adaptor
(supplied)
3
Connect the AC power adaptor to wall outlet.
Supplying power to the station begins
To stop supplying power to the station
Disconnect the AC power adaptor from wall outlet.
If you wish to use the camera on AC power, connect the DC cord of the
PCS-AC80 AC power adaptor (supplied) to the DC 8.4V IN connector on
the camera. Then connect the AC power adaptor to wall outlet. Now you
can use the camera on AC power.
Note
Use the AC power adaptor near the wall outlet. If some trouble occurs
during operation, immediately disconnect the AC power adaptor from the
wall outlet to cut power supply.
AC power cord
(supplied)
to wall outlet
37