Sony UPX-DP10 Manual De Instrucciones página 57

Printing in black and white
Print summary function
Adjusting the printout quality
Notes
When storing your printouts:
• Avoid storing the printout in a location subject to high temperatures, high
humidity, excessive dust and direct sunlight.
• Do not stick tape on a printout. Also, avoid leaving a plastic eraser on a
printout or placing a printout in contact with materials which contain
plasticizer (under a desk mat, for example).
• Do not allow alcohol or other volatile organic solvents to come into
contact with the printouts.
The camera takes color pictures, but they can be printed in black and white
on a color media. Set the B/W mode with the B/W COL button.
1 Tips
Color ribbon printers cannot produce perfectly achromatic pictures
because they print black and white pictures by overlaying yellow, magenta
and cyan. The menu item YEL-BLU provides for color adjustment, bluish
or yellowish.
With the print summary function, the LCD shows the total number of
printouts from the station and subtotals from a certain point. The subtotals
are useful in daily sales management and media management.
1
Press the MENU button to select "LAMINATION."
2
F
Press the button to select "PRINT INFO: TOTAL."
The value in the bottom row is the total number of printouts from the
station. It cannot be reset.
Viewing a subtotal that can be reset
g
Press the button to select "PRINT INFO: TALLY."
Resetting a subtotal
g
Press the button, to select "PRINT TALLY TO RESET," and press the
EXEC button.
Note
The "PRINT INFO: TOTAL" may not be 0 upon purchase of the product.
This is caused by a sampling check in the production process; it is not an
error.
The picture quality can be adjusted using the Menu functions of the station
before printing. If you print a color picture, you can check the adjusted
results by printing a color guide.
For details on adjustments, see "Picture Quality Adjustment."
57