Publicidad
Idiomas disponibles
Idiomas disponibles
CER 18-EC
Symbols used in this manual
WARNING!
Denotes impending danger. Non- observance
of this warning may result in death or
extremely severe injuries.
CAU TION!
Denotes a possibly dangerous situation. Non-
observance of this warning may result in
slight injury or damage to property.
N OTE
Denotes application tips and important
information.
Symbols on the power
tool
V
Volts
/min
Rotation rate
Wear Eye Protection
Wear Ear Protection
Read the instructions
Disposal information for the old
machine
Important safety information
WARNING!
Before using the power tool, please read the
follow:
these operating instructions,
the "General safety instructions" on the
handling of power tools in the enclosed
booklet (leaflet-no.: 315.915),
the currently valid site rules and the
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool may
be a danger to life and limb of the user or a third
party, or the power tool or other property may be
damaged.
The trim router may be operated only if it is
for its intended use
in perfect working order.
Faults which impair safety must be repaired
immediately.
Intended use
The rechargeable trim router CER 18-EC is
designed
– for commercial use in industry and trade,
– for straight and grooved milling and
the forming of edges in wood or similar
materials,
– for dust free routing when used in
combination with a suitable vacuum
cleaner/dust exactor.
Safety instructions for trim router
WARNING!
Read all safety warnings, instructions,
illustrations and specifications provided with
this power tool. Failure to follow all instructions
listed below may result in electric shock, fire
and/or serious injury. Save all warnings and
instructions for future reference.
■ Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the work by your
hand or against the body leaves it unstable
and may lead to loss of control.
■ Never operate cutter bits at speeds that
are higher than their maximum rated
speed. Cutter bits running faster than their
rated speed can break and fly apart.
■ Never use cutter bits with a diameter
exceeding the maximum diameter
specified in the technical data section.
Noise and vibration
The noise and vibration values have been
determined in accordance with EN 62841.
The A-weighted noise level of the power tool
is typically:
– Sound pressure level L
– Sound power level L
– Uncertainty:
Total vibration value:
– Emission value a
– Uncertainty:
:
79 dB(A);
pA
:
87 dB(A);
WA
K = 3 dB.
:
<2.5 m/s
h
K = 1.5 m/s
2
2
17
Publicidad
