Publicidad
Idiomas disponibles
Idiomas disponibles
PROGRAMMING AND STARTING UP
4
RECORDING OF THE TOTAL OPENING TRAVEL OF THE GATE
The recording of the pedestrian opening travel of the gate can be done using the ST2 mini-button, the wall key
or the remote control.
Before making the recording, ensure there is no person, animal or object in the radius of action of the
gate and the mechanism.
Start recording mode
Record the opening
Record the close
Finish the recording mode
1 Place DIP1 and DIP2 in "OFF".
DL3 shall remain off.
The travels for the leaves both in opening and
closing will be memorised.
50
Installation manual
1 Close the gate by pressing ST1.
2 Place DIP1 and DIP2 in "ON" (operation recording);
DIP3, DIP4, DIP6 and DIP7 in "OFF".
DL3 comes on and remains static.
3 Facilities with electrolock: Place DIP5 in "ON" (back
pulse).
4 Actuators with mechanical absorbers: Place DIP8 in
"ON" (slow down).
1 Start the opening: press ST1; the gate begins to
open.
2 Start slow down in opening: press ST1 at the
point chosen for the start of deceleration (DA).
3 Finish the opening: Press ST1 in the gate open
position.
If the installation has an opening end of travel, it
is not necessary to press ST1.
1 Start the close: press ST1; the gate begins to open.
2 Start slow down in closing: press ST1 at the point
chosen for the start of deceleration (DC).
3 Finish the closing: Press ST1 in the gate closed
position.
If the installation has a closing end of travel, it is
not necessary to press ST1.
The positions in which the leaf begins to slow
down, both in opening and in closing, will also
be memorised.
Publicidad
