Publicidad
Idiomas disponibles
Idiomas disponibles
5
RECORDING OF THE PEDESTRIAN OPENING TRAVEL OF THE GATE (TOP9 ONLY)
The recording of the pedestrian opening travel of the gate is done using the ST2 mini-button, the A.P. key or the
remote control.
The recording of the total opening travel must be complete.
If the gate collides with an obstacle during recording, repeat the recording process.
Before making the recording, ensure there is no person, animal or object in the radius of action of the
gate and the mechanism.
Start recording mode
Record the opening
Record the close
Finish the recording mode
1 Place DIP1 and DIP3 in "OFF".
DL3 shall remain off.
The pedestrian opening position will be
memorised.
PROGRAMMING AND STARTING UP
1 Close the gate by pressing ST1.
2 Place DIP1 and DIP2 in "ON" (pedestrian opening
recording); DIP3, DIP4, DIP6 and DIP7 in "OFF".
DL3 lights up, statically.
3 Facilities with electrolock: Place DIP5 in "ON" (back
pulse).
4 Actuators with mechanical absorbers: Place DIP8 in
"ON" (slow down).
1 Start the opening: press ST2; the gate begins to
open.
2 Start slow down in opening: press ST2 at the
point chosen for the start of deceleration (DA).
3 Finish the opening: press ST2 in the gate open
position.
1 Start close: press ST2; the gate begins to close.
2 Start slow down in closing: press ST2 at the point
chosen for the start of deceleration (DC).
3 Finish the closing: press ST2 in the gate closed po-
sition.
The positions in which the leaf begins to slow
down, both in opening and in closing, will also
be memorised.
Control panel AEP10-009/ AEP10TOP9
51
Publicidad
