Seca 651 Instrucciones De Uso página 100

5.9 Installing the drip guard
5.10 Adapting device settings
100 • seca 651/650
2. Insert the device connector of the power supply unit into the power supply
connection socket of the device.
3. Plug the power supply unit into a power supply socket.
4. Perform a function check
NOTICE!
Damage to device due to the ingress of fluids
Damage may occur to the device if dripping water or other dripping
fluids enter the device via the connection panel.
► Only operate the device with the drip guard installed.
1. Connect all cables as described in these instructions for use and in the in-
stallation instructions for the compatible products.
2. Position the drip guard on the connection panel as shown in the illustration.
3. Push the drip guard beneath the weighing platform up to the stop.
You have the following options for setting the device up for different usage situa-
tions:
è Changing device mode, page 112
•
è Calling up/exiting a menu, page 113
•
è Setting up network functions, page 123
•
è Function
check, page 132.