Seca 651 Instrucciones De Uso página 115

Setting filter
On devices with a measuring rod, the setting also applies to the display of
height.
NOTE
This function is activated at the factory on some models. The function
can be deactivated.
1. Press the key.
ð The
menu is displayed.
Settings
2. Press the or key until the
3. Select the desired setting:
– Function activated
– Function deactivated
4. To exit the menu, press the
Device mode
Basic
Advanced
Expert
Service
The function can be used to avoid interference during weight determina-
Filter
tion. The selected setting has the following effects on measurements with the
/ function activated:
Hold Autohold
• Sensitivity with which the weight display reacts to patient movements
• Time period until a weight is displayed permanently
1. Press the key.
ð The
menu is displayed.
Settings
2. Press the or key until the
3. Press the item.
Filter
ð The current setting is displayed.
Autohold menu item is displayed.
key.
Available
–
•
•
•
menu item is displayed.
Filter
Configuration • 115
English