Seca 651 Instrucciones De Uso página 82

2.6 Functional description
Measuring weight/entering height
Network functions
Compatibility
3 SAFETY INFORMATION
3.1 Safety information in these instructions for use
82 • seca 651/650
Weight calculation is performed by four load cells. The measured results are
shown on the multifunctional display. Height is entered manually.
Body Mass Index (BMI) or Body Surface Area (BSA) are calculated automatically
as soon as a height is entered.
The device can be integrated into a PC network via a LAN interface or via WiFi.
The seca connect 103 software is required to set up this integration.
The software receives measurement data from the device
seca connect 103
and forwards them to an EMR System or to the
The software receives measurement data from the
seca analytics 125
seca connect 103 software and processes them in graphical form. The software
thus assists the attending physician in analyzing measured results and making a
diagnosis.
configuration software: Version 3.1 or higher, no downward
seca connect 103
compatibility
seca analytics 125 analysis software: Version 1.8 or higher
DANGER!
Used to identify an extremely hazardous situation. If you fail to take
note of this information, serious irreversible or fatal injuries will occur.
WARNING!
Used to identify an extremely hazardous situation. If you fail to take
note of this information, serious irreversible or fatal injuries may result.
CAUTION!
Used to identify a hazardous situation. If you fail to take note of this in-
formation, minor to moderate injuries may result.
NOTICE!
Used to identify possible incorrect usage of the device. If you fail to
take note of this information, you may damage the device, or the mea-
suring results may be incorrect.
NOTE
Includes additional information about use of the device.
software.
seca analytics 125