Publicidad
38
ANALOG SIGNAL RECORDING
Basic operations
To stop recording | Press the Ii STOP button.
To pause
Press
the Bell
PLAY/
PAUSE button.
Press it again to resume re-
cording.
e Ifthe unit is not operated for more than 10 min-
utes in pause mode, pause is cancelled, the tape
stops and the power turns off in about 15 sec-
onds.
When the end of the tape is reached dur-
ing recording
The tape stops, "End" is displayed, and the power
turns off in about 15 seconds.
Quick checking of what is recorded
> w
Press the kK REW/REC REV button during re-
cording. The tape is rewound to the position where
a start !D is encoded, and the tape is played back.
(Recording review function)
e If the ké@ REW/REC REV button is pressed
during recording review operation, the tape is
rewound to the position where the start ID was
recorded and the unit stands by for recording.
e When the tape reaches the position where the
144. REW/REC REV bution was pressed, the
unit stands by for recording.
Publicidad
