Publicidad
HP/LINE/
DIGITAL OUT
HP/LINE/
DIGITAL OUT
4
OPTICAL IN
OUTPUT
PROGRAMMED PLAYBACK
Changing the programmed tracks
Press
the
ID WRITE/PROGRAM
button
repeatedly in the stop mode until the track num-
ber which you want to add to the program is dis-
played. Press either the PI
FF button or
I€4 REW button until the desired track number
is displayed. Then, press the ID WRITE/PRO-
GRAM bution.
Note
Pressing the fl STOP button after changing or
deleting a programmed track cancels the pro-
grams.
PLAYBACK THROUGH
CONNECTED EQUIPMENT
Connecting to equipment with OPTICAL
IN terminal —> EY
Connect the HP/LINE/DIGITAL OUT jack of the
unit to the OPTICAL IN terminal of equipment
using the optional optical digital cable.
@ Digital amplifier, etc.
© Optical plug
© Optical digital cable (optional)
© Optical mini plug
When the optical mini plug is connected to the
HP/LINE/DIGITAL OUT jack, it is automatically
switched to the digital output.
Adjust the volume on the connected equipment.
Connecting to equipment with LINE IN
terminal => Ej
Connect the HP/LINE/DIGITAL OUT jack of the
unit to the LINE IN terminal of equipment using.
the supplied connection cable.
© Stereo component
© Connection cord (supplied)
@ Red plug
© White plug
Set the OUTPUT switch of the unit to the LINE
position.
Adjust the volume on the connected equipment.
Publicidad
