cecotec EnergySilence Aero 3600 Invisible Natural Design Manual De Instrucciones página 48

ENGLISH
Box content
- Fan
- Remote control
- Assembly kit
- Batteries 2 x AAA
- Instruction manual
3. ASSEMBLING THE APPLIANCE
Fig. 2 key:
- Wood screws x4
- Mounting bracket
Fig. 3 key:
- Expansion bolt
- Screw hook
- Drilling diagram
Wooden ceiling
Secure the mounting bracket firmly to the wooden ceiling beam with a drill bit (Figure 2).
Concrete ceiling
You can enlarge the holes in the mounting bracket with a medium 8 mm drill bit. Use the M6
expansion bolts to attach the mounting bracket to the side of the screw hook.
The distance between the screw hooks and the mounting bracket must be between 8 and 10
mm. The installation of the screw hook must not interfere with the mounting bracket and must
not affect the positioning of the receiver (Figure 3).
Safety rope installation
1. Loosen the screw on the locking side of the wire rope, place the wire rope ring on the hook
of the expansion bolt, tension the wire rope, and then tighten the wire rope locking screw.
(Fig. 4).
2. Connect the cable according to the wiring instructions in the wiring diagram.
Fig. 5 key:
L: Live wire
N: Neutral
Earth wire
48 ENERGYSILENCE AERO 3600 INVISIBLE NATURAL DESIGN