Pioneer BDR-S13E-X Manual Del Propietário página 16

Useful Functions
Cautions in usage
• The default setting is standard mode.
• If power to the drive is turned off without selecting the [Save setting to the drive] checkbox,
the settings will revert to the previously saved settings.
• Settings can be changed at any time using the Pioneer BD Drive Utility, when the drive is
recognized.
PureRead
Explanation of PureRead function
When using this device to read a music CD, you can use PureRead. This function allows the
device to work to acquire and reproduce the original sound as much as possible such as by
repeatedly reading scratched or soiled parts of the CD. PureRead can be set to the following two
modes or turned off.
Master Mode
(default setting)
Perfect Mode
OFF
What is interpolation?
Audio data that cannot
be read because of
scratches or other
damage is created by
inference from sounds
before and after it. This
sound will be degraded
compared to the original
sound.
16
BDR-S13E-X
This mode works to acquire and reproduce the original sound as much
as possible, but if it encounters audio data that cannot be completely
reproduced, it interpolates that data and continues with acquisition.
This mode reproduces the original sound, and if it encounters audio data
that cannot be completely reproduced, it stops and halts acquisition.
This mode carries out normal acquisition of music CD data. If there is a
scratch that prevents reading, interpolation will occur.
Sampling
Original
waveform
Original
waveform
Corrupted Acquired
waveform from audio
scratches, etc. waveform
Audio is
interpolated
from sounds
before and
after.