EN
2. Menu / Page Up Button: Menu / Navigate page up.
3. Digital Display Screen: This digital display screen
shows important electrical system information. See
Digital Display Screen under Operation. (Reference
7.4)
4. Lights / Page Down Button: Activate lights /
Navigate page down.
5. Drive Speed / Confirm Button: Adjust the drive
speed (cyclic). / Press to confirm.
6. USB Charging Port: Open the top cover to access
the USB-A and USB-C charging ports. The mower must
be activated for charging.
Attempting to charge devices rated more than 2.1
amps could damage the USB charging port and/or the
mower.
7. Phone Slot: Mobile device storage.
8. Ignition Switch: This switch is used to turn the
mower on and off. The start key must be inserted before
the switch can be operated.
9. PTO (Power Take Off) Switch: The PTO switch
engages and disengages the mower blades. Pull UP on
the switch to engage, and push DOWN to disengage.
Do not engage PTO switch when the deck is under
load. Failure to do so may damage the motor and/or
deck.
5.1.7 REAR STORAGE BIN
The mower's rear storage bin can transport various
tools or materials, with a maximum load capacity of
200 lbs. It is equipped with a tipping mechanism for
unloading materials.
When driving on the slope, the maximum load
capacity of the rear storage bin is 90 lbs.
1. Move the release lever forward to disengage the
rear storage bin.
2. The rear storage bin will tip backward.
CAUTION
CAUTION
WARNING
English
3. To return the storage bin to its original position,
push the release lever forward, then push the rear
storage bin forward until it securely locks onto the
release lever hook.
6
ELECTRICAL SYSTEM
6.1
ELECTRICAL SYSTEM SAFETY
To reduce the risk of serious personal injury from fire or
electric shock when working on the electrical system:
•
Always remove the start key and batteries, and read
operator manual before working on this product.
•
Always remove the start key and batteries when
transporting the product.
•
Keep the product free of grass clippings, leaves
and other debris. DO NOT use water to clean the
product. Use only compressed air. Wear adequate
eye and hearing protection when cleaning the
product.
•
Always wear protective gear (safety glasses, face
shield and gloves) when working with the battery.
Use insulated tools.
•
Clean the product of all dirt and debris. Do not use
solvents, hard cleaners or abrasives.
•
Keep the area clear of bystanders when engaging
the PTO switch.
•
Never allow flames, sparks or smoking near the
product or batteries.
•
Keep the product and batteries out of reach of
children.
•
Always keep protective shields, covers and guards
in place and securely fastened. If they become
damaged, repair or replace immediately. Never
modify or remove safety devices.
6.2
ELECTRICAL SYSTEM
INFORMATION
The product is powered by an 82V electrical system. It
consists of the following components:
1. Blade controller (1)
2. Blade motor (3)
3. Drive controller (2)
18