Descargar Imprimir esta página

GreenWorks MZ548 Manual Del Operador página 19

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Accelerator - right (1)
5. Accelerator - left (1)
6. Digital display (1)
7. Wheel motor (2)
8. Battery (6)
9. Front light (2)
10. Front fender light (2)
11. Rear light (2)
12. ROPS light (1)
13. ETO socket (1)
7
OPERATION
This section describes how to operate the product.
WARNING
CAREFULLY READ AND UNDERSTAND
THE SAFETY CHAPTER AND OPERATION
INSTRUCTIONS BEFORE YOU OPERATE THE
PRODUCT.
7.1
BEFORE OPERATION
7.1.1 CONNECT THE BATTERIES TO THE
PRODUCT
WARNING
Only use genuine Greenworks batteries with the
product.
1. Make sure that the batteries are fully charged.
2. Press the release button to open the small battery
compartment cover.
3. Push the small batteries into the battery
compartment. The battery locks into position when
you hear a click.
CAUTION
If the battery does not move easily into the
rectangular compartment, the battery is not
installed correctly. This can cause damage to the
product.
English
4. Push the suitcase battery into the large battery
compartment. The suitcase battery locks into
position when you hear a click. Connect the plug
to the suitcase battery.
5. Put the large compartment cover on the
compartment, pull the latches to lock the cover.
7.1.2 RAISE AND LOWER THE ROLL BAR
Avoid serious injury or death from roll over:
Wear seat belt when the roll bar is raised.
There is no rollover protection when the roll bar is
lowered.
Lower the roll bar only when necessary and
NEVER remove it.
Do NOT use seat belt with the roll bar down.
Raise the roll bar when space allows.
Do NOT jump off if the mower tips.
To lower the roll bar:
1. Extract R pins from clevis pins.
2. Remove clevis pins. Adjust the top bar if needed to
free the pins from the roll bar.
19
WARNING
EN

Publicidad

loading

Este manual también es adecuado para:

Mz608