Descargar Imprimir esta página

GreenWorks MZ548 Manual Del Operador página 29

Ocultar thumbs Ver también para MZ548:

Publicidad

Idiomas disponibles

Idiomas disponibles

10
MAINTENANCE
10.1 MAINTENANCE SAFETY
Specific steps must be taken in order to perform service and maintenance procedures safely.
Read and follow all the applicable safety and instructional messages in this manual.
Always disengage the mower blades, set the parking brake, shut the mower off, remove the start key, remove the
batteries and wait for all movement to stop prior to performing service and maintenance procedures.
Wear appropriate personal protective equipment such as safety shoes, safety glasses, gloves and ear protection.
Long hair, loose clothing or jewelry may get tangled in moving parts. Secure hair above shoulder level before
starting work.
Use of parts that are not authorized or approved by Greenworks may cause serious or fatal injury or property
damage.
10.2 BATTERY MAINTENANCE
The mower is powered by Lithium-Ion batteries which, when maintained properly, will provide years of useful life. For
proper care, adhere to the following instructions:
Always charge battery after each use. This is especially crucial when temperatures drop below 32°F (0°C).
Over-discharge will shorten battery life and risk permanent damage. If a full charging cycle is not possible
immediately after cutting, a 5-10 minute cycle will help maintain battery health. Fully re-charge the battery within
24 hours after use. To maintain proper calibration, run and charge the mower at least once a month. Complete a
full charge every six months.
Keep grass, dirt and debris from collecting in battery area.
Charge battery in an enclosed, dry area away from sparks and flames. Never expose charger to rain, water vapor
or other liquids.
Do not touch uninsulated portion of charger (terminal pins) or output connector.
Do not use charger if cords are damaged.
Please refer to the Battery Manual for more information of batteries.
10.2.1 ROUTINE MAINTENANCE
Routine maintenance should include cleaning and inspection.
During the battery charging process:
Make sure the charging plug connects securely and fully in the socket;
Make sure the charger operates without faults;
Address any faults and have them repaired before charging.
During the operation of the mower and when charging the battery, keep the charging port away from water and
other conductive materials. Never charge when the mower is wet.
Charging time will depend on a number of factors, including battery health, ambient temperatures and other
factors. Monitor the battery for abnormal performance or behavior.
10.3 CHARGING
10.3.1 CHARGE THE SMALL BATTERY AND SUITCASE BATTERY
The batteries can be charged separately. The four small batteries can be charged with a separate, specific charger
(not provided), and the two suitcase batteries can be charged with the mower charger.
Refer to the Battery Charger Manual for the two battery types for more charging information of the batteries.
10.3.2 CHARGE THE PRODUCT
1. The charging port is located near the footrest. Open the port cover from the battery charging port on the mower.
2. Plug the charger into the battery charging port, and make sure it is firmly plugged in.
3. Plug the charger into a power outlet, and make sure it is firmly plugged in.
4. When the mower is charging, the digital display will show the battery percentage.
English
29
EN

Publicidad

loading

Este manual también es adecuado para:

Mz608