Publicidad
Idiomas disponibles
Idiomas disponibles
a)
Do not use the device when tired, ill or under the influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the device.
b)
The machine may be operated by physically fit persons who are able to handle the machine, are
properly trained, who have reviewed this operating manual and have received training in occupational
health and safety.
c)
The machine is not designed to be handled by persons (including children) with limited mental and
sensory functions or persons lacking relevant experience and/ or knowledge unless they are
supervised by a person responsible for their safety or they have received instruction on how to
operate the machine.
d)
When working with the device, use common sense and stay alert. Temporary loss of concentration
while using the device may lead to serious injuries.
e)
Use personal protective equipment as required for working with the device, specified in section 1
"Legend". The use of correct and approved personal protective equipment reduces the risk of injury.
f)
To prevent the device from accidentally switching on, make sure the switch is on the OFF position
before connecting to a power source.
g)
Do not overestimate your abilities. When using the device, keep your balance and remain stable at all
times. This will ensure better control over the device in unexpected situations.
h)
Do not wear loose clothing or jewellery. Keep hair, clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in moving parts.
i)
If suction is to be connected to the device, check all connections and make sure they are tight. Using a
dedusting system may reduce the risks associated with dust.
j)
Remove all adjusting tools or spanners before turning the device on. A tool or spanner left in the
revolving part of the device may cause injury.
k)
Use eye, ear and respiratory protection.
l)
The device is not a toy. Children must be supervised to ensure that they do not play with the device.
m) Do not put your hands or other items inside the device while it is in use!
2.4.
Safe device use
a)
Do not overload the device. Use the appropriate tools for the given task. A correctly-selected device
will perform the task for which it was designed better and in a safer manner.
b)
Do not use the device if the "ON/OFF" switch does not function properly (does not switch the device
on and off). Devices which cannot be switched on and off using the ON/OFF switch are hazardous,
should not be operated and must be repaired.
c)
Disconnect the device from the power supply before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces the risk of accidental activation.
d)
When not in use, store in a safe place, away from children and people not familiar with the device who
have not read the user manual. The device may pose a hazard in the hands of inexperienced users.
e)
Keep the device in perfect technical condition. Before each use check for general damage, especially
check moving components for cracked parts or elements, and for any other conditions which may
impact the safe operation of the device. If damage is discovered, hand over the device for repair
before use.
f)
Keep the device out of the reach of children.
g)
Device repair or maintenance should be carried out by qualified persons, only using original spare
parts. This will ensure safe use.
h)
To ensure the operational integrity of the device, do not remove factory-fitted guards and do not
loosen any screws.
i)
When transporting and handling the device between the warehouse and the destination, observe the
occupational health and safety principles for manual transport operations which apply in the country
where the device will be used.
j)
Avoid situations where the device stops working during use due to excessive loading. This may result
in overheating of the drive elements and damage to the device.
k)
Do not touch articulated parts or accessories unless the device has been disconnected from the power
source.
l)
Do not move, adjust or rotate the device in the course of work.
EN
Publicidad
