Publicidad
Idiomas disponibles
Idiomas disponibles
m) Do not leave this appliance unattended while it is in use.
n)
Clean the device regularly to prevent stubborn grime from accumulating.
o)
Do not work on two workpieces at the same time.
p)
Do not touch any moving parts or accessories unless the device has been disconnected from the
compressed air supply.
q)
Do not cover the air intake and outlet.
r)
The device is not a toy. Cleaning and maintenance may not be carried out by children without
supervision by an adult person.
s)
It is forbidden to interfere with the structure of the device in order to change its parameters or
construction.
t)
Keep the device away from sources of fire and heat.
u)
Do not cover the ventilation openings!
v)
NOTE: During operation, some elements of the device become very hot – scalding hazard!
w)
Do not touch the moving cutting elements. Danger of cutting or amputating fingers/limbs
ATTENTION! Despite the safe design of the device and its protective features, and despite the use
of additional elements protecting the operator, there is still a slight risk of accident or injury when
using the device. Stay alert and use common sense when using the device.
3. Use guidelines
The router is ideal for machining wood and plastic and also for cutting out knots, cutting grooves,
removing recesses, copying curves and logos, etc. The router must not be used for machining metal,
stone, etc.
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any
kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Attention: The use of an accessory or an attachment not recommended in these operating
instructions can lead to bodily injuries.
This product may be used only for the intended purpose. Any application not described in these
operating instructions is regarded as inappropriate use. The operator, and not the manufacturer, is
responsible for all damage or injuries as a result of inappropriate application.
• Support long work pieces correctly.
• Keep the table openings as small as possible regarding the size of the cutting tool by use of the
correct table rings.
• Additional aids, like horizontal pressure means, are to be used for working on narrow work pieces.
• Do not stand the machine in rain.
4. Package contents
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport damage.
EN
Publicidad
