HydroControl M
Safety-related information
1.1
Validity of the instructions
These instructions are valid for the HydroControl M fi xed
orifi ce double regulating valve with internal thread.
Nominal size
DN15 ULF
DN15 LF
DN15 MF
DN 15
DN 20
DN 25
DN 32
DN40
DN50
1.2
Scope of delivery
Check your delivery for transport damage and
completeness.
The scope of delivery includes:
•
HydroControl M fi xed orifi ce double regulating valve
•
Operating instructions
1.3
Contact
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
GERMANY
www.oventrop.com
Technical customer service
Phone: +49 (0) 29 62 82-234
1.4
Symbols used
Highlights important information and further
additions.
Action required
•
List
1
Fixed order. Steps 1 to X.
2
Result of action
1.
Safety-related information
1.1
Intended use
Operational safety is only guaranteed if the product is
used as intended.
The Hydrocontrol fi xed orifi ce double regulating valve is
installed in the pipelines of hot water central heating and
36
Item no.
1065844
1065834
1065824
1065804
1065806
1065808
1065810
1065812
1065816
cooling systems and enables the hydronic balancing of the
pipelines with each other.
Any further and/or different use is considered unintended
use.
Claims of any kind against the manufacturer and/or his
authorised representatives for damage resulting from
unintended use cannot be recognised.
Intended use also includes correct compliance with these
instructions.
1.2
Warnings
Each warning contains the following elements:
Warning symbol
SIGNAL WORD
Type and source of danger
Possible consequences if the danger occurs or the
warning is ignored.
!
Ways to avoid the danger.
Signal words defi ne the severity of the danger posed by a
situation.
DANGER
Indicates an imminent danger with high risk. If the
situation is not avoided, death or most serious bodily
injuries will result.
WARNING
Indicates a possible danger with moderate risk. If the
situation is not avoided, death or serious bodily injuries
may result.
CAUTION
Indicates a possible danger with lower risk. If the
situation is not avoided, minor and reversible bodily
injuries will result.
NOTICE
Indicates a situation that can potentially result in damage
to property if not avoided.
1.3
Safety instructions
We have developed this product in accordance with
current safety requirements.
Observe the following instructions for safe use.
1.3.1
Danger due to insuffi cient personnel
qualifi cation
Work on this product may only be carried out by suitably
qualifi ed specialist tradespeople.
Due to their professional training and experience as well
as knowledge of the relevant legal regulations, qualifi ed
specialist tradespeople are able to carry out work on the
described product in a professional manner.
Operator
The operator must be instructed in the operation by
specialist tradespeople.
1000086521_10242266 000 00