Publicidad
Idiomas disponibles
Idiomas disponibles
• caRol R PRO and caRol R TS150 winches,
EN 1496 lifting rescue device.
• Tracpode PRO EN 795:2012/B tripod.
• Connector (EN 362).
• Full
body
harness
(EN 361/358/813).
• Full arrest device (EN 360, EN 353-2 or
EN 355). All other associated equipment is
forbidden.
8.2. Lifting
• Tracpode PRO equipped.
• caRol R PRO equipped with its Tracpode PRO
bracket.
• caRol R TS150 equipped with its Tracpode
PRO bracket.
• caRol Duratech 150 equipped with its Tracpode
PRO bracket.
9. Daily care, transport and storage
To perform the daily care, use only clear,
cold water, a mild detergent for fabrics, and a
synthetic brush.
After washing or if during use, the product is wet,
allow it to dry naturally in a shaded location away
from any source of heat.
During transport and storage, protect the
equipment in a dry packaging against any
danger (shock, source of direct heat, chemical
products, UV radiation, etc.).
For associated Blocfor R EVO and caRol
Duratech 150 systems, see the specific manuals
of the associated products.
10. Equipment compliance
TRACTEL SAS RD 619 – Saint-Hilaire-sous-
Romilly – F-10102 Romilly-sur-Seine France
hereby declares that the safety equipment
described in this manual complies with the
equipment tested with the Tracpode PRO.
The Tracpode PRO equipped with its PPE pulley
under head and a Blocfor R EVO ESD 150
installed with its bracket for Trapode PRO:
• Is identical to the equipment that was
inspected for compliance by the laboratory
(EN
361)
or
The Tracpode PRO equipped with its lifting pulley
under head and a caRol R PRO 20 installed with
its bracket for Trapode PRO:
• Is identical to the equipment that was
• Is subject to a declaration of conformity to:
The Tracpode PRO equipped with the lifting
pulley under head, and a caRol R TS150
installed with its bracket for Tracrode PRO:
• Is identical to the equipment that was
• Is subject to a declaration of conformity to:
The Tracpode PRO equipped with the lifting
pulley under head, and a caRol Duratech
installed with its bracket for Tracrode PRO:
• Is subject to a declaration of conformity to the
The non-EC examination certificate of conformity
issued
declarations of conformity to standards exclude
applications associated with other directives.
Depending on their use, these other products
are subject to a declaration of conformity as
specified above.
Quintin Certification - 825 ROUTE DE
ROMANS 38160 SAINT ANTOINE L'ABBAYE
- France, and tested according to standard
EN 1496:2017 class B at a shear resistance to
rupture of 15 kN.
inspected for compliance by the laboratory
Quintin Certification - 825 ROUTE DE
ROMANS 38160 SAINT ANTOINE L'ABBAYE
- France, and tested according to standard
EN 1496:2017 class B at a shear resistance to
rupture of 15 kN.
• Directive
2001/45/EC,
working devices.
• Machinery Directive 2006/42/EC, load
lifting.
inspected for compliance by the laboratory
Quintin Certification - 825 ROUTE DE
ROMANS 38160 SAINT ANTOINE L'ABBAYE
- France, and tested according to standard
EN 1496:2017 class B at a shear resistance to
rupture of 15 kN.
• Directive
2001/45/EC,
working devices.
• Machinery Directive 2006/42/EC, load
lifting.
Machinery Directive 2006/42/EC, lifting loads.
by
Quintin
Certifications
EN
rope-suspended
rope-suspended
and
the
15
Publicidad
