caRol™ R PRO 20 and caRol™ R TS150
bracket
EN
BRACKET
DESCRIPTION
REF.
BLOCFOR TRACPODE
218428
PRO BRACKET
CAROL R PRO 12
218448
BRACKET
CAROL R PRO 20/TS
218468
BRACKET
With:
W: Weight of the system or bracket
L: Length of the system cable
1. Important instructions
1� Before using the product, it is essential that
the supervisor and operator review and
understand the information in the manual
provided by Tractel SAS, in order to ensure
safe and effective use of the equipment. This
manual must be made available at all times
to all operators. Additional copies can be
obtained upon request from Tractel
2. Before using this product, it is essential
to have been trained to use it. Check the
condition of the product and associated
equipment and ensure there is enough fall
clearance.
3� The product may only be used by trained and
skilled operators or by operators under the
oversight of a supervisor.
4� The product must be checked by Tractel
SAS or by an authorised and qualified
technician who must authorise in writing the
re-commissioning of the product. It must not
be used if:
• It is not in a visibly good condition.
• There are concerns about how safe it is.
• It has been used to arrest a fall.
• It has not undergone a periodic inspection
over the past 12 months; user safety
depends
effective and strong.
6
COMPATIBLE
A
B
C
D
P
(mm)
(mm)
(mm)
(mm)
(kg)
153
210
135
102
1.9
239
191
62
102
2.8
289
279
62
102
3.8
®
on
keeping
the
equipment
5� It is advisable to conduct a visual inspection
before each use; the operator must make
sure that each component is in good working
order. The safety functions must not be
damaged in any way during set-up.
6� No modifications or additions may be made
without the prior written consent of Tractel
SAS. The equipment must be transported
and stored in its original packaging.
7� If the weight of the operator plus that of their
SYSTEM
equipment is between 100 kg and 150 kg, it
REF.
is essential to make sure that the total weight
087742
087492
does not exceed the safe working load of
087502
each component of the fall-arrest system.
218438
218498.
8� This product may be used in temperatures
299249
ranging from -35 °C to +60 °C.
218458
9� Comply with locally applicable occupational
regulations.
10. The operator must be physically and mentally
fit when using this product. If in doubt, check
with your doctor or your occupational doctor.
Pregnant women may not use this product.
11� This product should not be used beyond
its limits or in any situation other than for
its intended use. (See "4. Functions and
descriptions.")
12. Before each use of a fall-arrest system,
check that there is enough fall clearance and
that there are no obstacles in the path of the
�
fall.
13� A full body harness in accordance with
EN 361 is the only equipment around
the body that may be used in a fall-arrest
system; secure it to the point marked A on
the harness.
14� It is essential for operator safety that the
device or anchor point is correctly positioned
and that work is carried out so as to minimise
the risk of falls from height.
15� For the operator's safety, if the product is re-
sold outside the initial destination country,
the distributor must supply: an instruction
manual and maintenance instructions for
periodic inspections and repairs, all written in
the language of the product's country of use.
16� In addition to fall protection equipment, it is
essential for the safety of the operator and
supervisor that they use personal protective
equipment such as helmets, safety glasses,