Starting Up; Placement - melitta CAFFEO SOLO & milk Manual De Instrucciones

4

Starting up

When starting the appliance for the fi rst time, please carry out the following steps.
When you have completed these steps, the appliance is ready for operation. You
can now prepare coffee.
We recommend pouring away the fi rst two cups of coffee after the fi rst start
up.
4.1

Placement

• Place the appliance on a stable, level, and dry surface. Ensure that
there is a distance of 10 cm to the wall and other objects.
• The Melitta CAFFEO
®
the appliance. It can be easily moved by lifting slightly at the front.
Caution!
– Never place the appliance on hot surfaces or in damp areas.
– Do not transport or store the appliance in vehicles or rooms at low
temperatures, as the remaining water could freeze or condense and
thereby damage the appliance. Please take note of the information on
page 77.
• The coffee grounds container is located in the drip tray. Please make
sure that the drip tray is pushed into the appliance all the way to stop.
Notes
– Keep the packaging material, including hard foam elements, in order to
avoid damage during transport or in case of return shipments.
– It is normal to fi nd traces of coffee and water in the appliance before it
is started up for the fi rst time. This is because the appliance has already
been tested for faultless function at the factory.
50
SOLO &milk has two rollers on the back edge of
® ®