Descargar Imprimir esta página

Fronius STRING CONTROL 125/25 Manual De Instrucciones página 6

Supervisión del equipo
Ocultar thumbs Ver también para STRING CONTROL 125/25:

Publicidad

Idiomas disponibles

Idiomas disponibles

Intended Use
Ambient Conditi-
ons
Qualified Person-
nel
Safety Precauti-
When installing devices with air vents, make sure that cool air can flow freely through the
ons at Equipment
vents unobstructed. The device should only be operated in accordance with the protec-
Location
tion class listed on the rating plate.
ud_fr_se_sv_01381
012012
The equipment may only be operated in compliance with its intended use.
Any other purpose does not constitute intended use. The manufacturer is not
responsible for any damages resulting from unintended use.
Intended use also includes:
-
reading and complying with all general information as well as safety
information and warnings from the operating instructions
-
compliance with all inspection and maintenance requirements
-
installation as per operating instructions
Where appropriate, the following guidelines should also be applied:
-
Utility company regulations regarding grid feed-in
-
Information from solar module manufacturer
Operation and/or storage of the device outside of the stipulated range does
not constitute intended use. The manufacturer is not responsible for any
damages resulting from unintended use.
Please refer to the technical data in your operating instructions for informati-
on about permitted ambient conditions.
The servicing information contained in these operating instructions is intended
only for the use of qualified service engineers. An electric shock can be fatal.
Please do not perform any actions other than those described in the docu-
mentation. This also applies to qualified personnel.
All cables and wires must be secured, undamaged, insulated and adequately
dimensioned. Loose connections, scorched, damaged or under-dimensioned
cables and wires must be repaired immediately by an authorized specialist.
Maintenance and repair may only be carried out by an authorized specialist.
The use of third-party parts does not guarantee that they were designed and
manufactured according to operational demands and safety requirements.
Use only original spare parts (also applies to standard parts).
Do not carry out any alterations, installations or modifications to the device
without first obtaining the manufacturer's permission.
Immediately replace any components that are not in perfect condition.
II

Publicidad

loading