geberit MAPRESS Manual Del Usuario página 67

If a press connection has not been completely pressed – in
the event of a power cut, for example – it must be pressed
again. The Geberit pressing jaw and the pressing collar
must not be removed or rotated during the process.
Corrective pressing is performed in the same way as a
normal pressing operation. Depending on the state of the
preliminary pressing, there may be considerable idle stroke
before the pressing tool engages during corrective pressing.
Maintenance
Maintenance regulations for Geberit pressing
attachments
For safety reasons, it is absolutely essential to observe the
following maintenance intervals and perform the maintenance work
described. The same also applies to the mandatory maintenance
regulations for the pressing tools. Geberit pressing collars and
adapter jaws that are not maintained, or are not professionally
maintained, can cause accidents and injuries.
It is essential to observe the maintenance intervals and
maintenance work outlined below:
36028804990855691 © 12-2023
970.496.00.0(01)
EN
67