Publicidad
Dock Configuration
5
Getting the Device Binding Code
1. Use a computer to visit https://fh.dji.com, and log in to DJI FlightHub 2 using a DJI account. Click to create
an organization, fill in the organization information, and click the created organization name to enter the
organization page.
2. Click Devices > Dock > Device Binding as shown in the diagram to obtain the organization ID and device
binding code.
Configuring the Dock Using DJI Pilot 2
• DO NOT move a configured dock. If the site changes, the dock needs to be reconfigured.
• Make sure to keep a safe distance when using the app to open the dock cover in order to avoid
injury. Press the emergency stop button on the dock to stop the dock cover from opening, if
necessary.
• When the aircraft is placed in the dock. Make sure to move the two blades of each motor to be at
90° with each other in order to avoid breaking the propellers when closing the dock cover using
the close button.
• DO NOT press the dock cover or place heavy objects on it.
Prepare the aircraft by referring to the DJI Matrice 3D Series User Guide included in the aircraft packaging.
Place the aircraft next to the dock. Press, then press and hold the power button to power on the aircraft.
1. Power on the remote controller, run DJI Pilot 2, and switch the aircraft model to Matrice 3D Series.
2. Use the USB-C cable to connect the USB-C port of the remote controller to the USB-A port of the dock
electrical cabinet, then follow the prompts to complete the linking, activation and configuration for the
dock and the aircraft.
3. The dock cover can be opened with one click in the app during configuration. Make sure the aircraft
orientation is consistent with the arrow mark
landing pad as shown in the diagram to complete the configuration. Dock Onsite Debugging in DJI Pilot 2
provides the dock status, the aircraft status, and operations such as testing air conditioning, controlling
the dock cover, and charging the aircraft.
4. Remove the protective sticker on the temperature and humidity sensor.
5. After disconnecting the USB-C cable, close and lock the electrical cabinet door using a 2.5mm hex key.
[1] The aircraft can be charged after it is linked with the dock. Make sure to keep the dock covers closed during charging and the
landing pad surface clear of any metal objects.
1
10
[1]
2
on the landing pad, and the aircraft is placed on the
Aircraft Orientation
4
3
5
Publicidad
