Publicidad
Creating the Flight Route and Flight Plan
• When planning a flight route in DJI FlightHub 2, make sure
to check the flight altitude. Fly with caution.
1. Click Project >
>
route, select Matrice 3D Series from the aircraft and payload list,
and then click OK.
2. Right-click the mouse to add a waypoint in the route editor, then
add waypoint actions, set route parameters, and finally save and
exit.
3. Click
> Create Plan to display the diagram shown. Fill in the flight
plan name, select the flight route and dock, set the Plan Timer to
Immediate, set the RTH altitude relative to the dock, and the Signal
Lost Action during Flight, and click OK to complete the new flight
plan.
Performing the Flight Task
• During the flight test, make sure the remote controller is connected to the aircraft as Controller B.
1. After starting the flight task, the dock cover will open. Once the aircraft takes off, the dock cover will close
and the aircraft will begin to perform the flight route.
2. Click Project > Team
of the dock and aircraft in the left column. Click
time status information and live view of the dock and aircraft. Users can view the planned route (in green)
and the flight trajectory (in blue) of the aircraft on the map.
3. After completing the flight route, the aircraft flies above the dock, and the dock will automatically open
the dock cover to allow the aircraft to land. After the aircraft lands, the dock automatically closes the dock
cover.
4. After the flight task is complete, the media files will be automatically uploaded to the cloud. Click
open the plan library. Users can view the number of media files in the media upload bar, and click the
corresponding number to open the media library to view the media files captured during flight.
• During the flight task, press the emergency stop button to test if the aircraft can fly to the alternate
landing site.
• The software images are for reference only. The actual interface varies according to the software
version.
12
+
>
on the flight route list to create a flight
to display the diagram shown, view the flight task status and warning information
to open the device status window, and view the real-
to
Publicidad
