Setting The Date And Time - Omron MIT Elite Plus Manual De Instrucciones

HEM-7301-ITKE_main.book Page 12 Friday, October 3, 2008 12:42 PM
2.Preparation
2.2

Setting the Date and Time

Your blood pressure monitor automatically stores up to 90
measurements values with the date and time. To make use of the
memory and average values functions:
• Set the unit to the correct date and time before taking a measurement
for the first time.
• If the batteries have been removed for more than 30 seconds, the
Date/Time setting will need to be set.
1.
Press and hold the Date/time setting
button ( ) to adjust the date and
time. The year digits (2008) will flash
on the display.
2.
Press the Memory button (
advance the digits one at a time.
Notes:
• The range for the year setting is
2008 to 2030. If the year reaches
2030, it will return to 2008.
• If you hold down the Memory
button ( ), the digits will advance
rapidly.
12
) to