Applying The Arm Cuff - Omron MIT Elite Plus Manual De Instrucciones

HEM-7301-ITKE_main.book Page 17 Friday, October 3, 2008 12:42 PM
3.2

Applying the Arm Cuff

Notes:
• Be sure to wrap the arm cuff correctly so that you get accurate
results.
• Measurements can be taken in light clothing. However, please
remove thick clothes, such as sweaters, before taking a reading.
• You can take a measurement on either your left or right arm. The
blood pressure can differ between the right arm and the left arm and
therefore also the measured blood pressure values can be different.
Omron recommends to always use the same arm for measurement. If
the values between the two arms differ substantially, please check
with your doctor which arm to use for your measurement.
Taking measurements on the left arm
1.
Insert the air plug into the air
jack on the left side of the main
unit.
3.Using the Unit
EN
17