Descargar Imprimir esta página

Bebeconfort ECE R129 Manual Del Usuario página 17

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
ATTENTION:
• In case of belted installation, make sure the straps holding the car seat to the
vehicle are tight
• After putting the child in the car seat, ensure that any straps (such as the harness)
are sufficiently tight by pulling the webbing and are adjusted to the child's body.
Before every use, make sure the straps (e.g. of the harness or the belt) are not
damaged or twisted.
• The rigid parts and the plastic sections of an Enhanced Child Restraint Systems
device should be positioned and installed in such a way that they cannot, under
normal conditions of use of the vehicle, become trapped under a moving seat
or in the vehicle door.
• Always fasten the Child Restraint System even when the child is not sitting in it.
• The user must always check that any luggage and other objects likely to cause
injury to the occupant of the car seat in the case of impact are properly secured.
• Never place heavy objects on the rear parcel shelf, to avoid the danger of
projectiles in the event of an accident.
• Do not use the Enhanced Child Restraint Systems device without the cover.
• Do not replace the seat cover with a cover other than that recommended by
the manufacturer, because it will have a direct effect on the functioning of the
Enhanced Child Restraint Systems.
• Folding seats must always be locked in place.
Care advice
• Before cleaning, check the label sewn into thefabric. You will find the wash symbols indicating the
method of washing each item.
• Keep the car seat clean. Do not use lubricantsor aggressive cleaning agents.
• Clean the shell using a damp cloth.
Environment
Keep plastic covering away from children to avoid suffocation.
For environmental reasons, when you have stopped using this product, we ask that you dispose of
the product in the proper waste facilities in accordance with local legislation.
Warranty
Our 24 months warranty reflects our confidence in the high quality of our design, engineering,
production and product performance. We confirm that this product was manufactured in accor-
dance with the current European safety requirements and quality standards which are applicable to
this product, and that this product is free from defects on materials and workmanship at the time of
purchase.
Under the conditions mentioned herein, this warranty may be invoked by
consumers in the countries where this product has been sold by a
subsidiary of the Dorel Group or by an authorized dealer or retailer.
Our 24 months warranty covers all manufacturing defects in materials and
workmanship when used in normal conditions and in accordance with our user manual for a period
of 24 months from the date of the original retail purchase by the first end-user customer. To request
repairs or spare parts under our warranty
for defects in materials and workmanship you must present your proof of purchase, made within the
24 months preceding the service request.
Our 24 months warranty does not apply to defects caused by normal wear and tear, damage caused
by accidents, abusive use, negligence, fire, liquid contact or other external cause, damage which is
the consequence of failing to comply with the user manual, damage caused by use with another
product, damage caused by service by anyone who is not authorized by us, or if the product is
stolen or if any label or identification number has been removed from the product or has been
changed. Examples of normal wear and tear include wheels and fabric worn down by regular use
and the natural breakdown of colors and materials due to normal aging of the product.
EN
17

Publicidad

loading