Comet CRRL 75 Manual De Instrucciones página 31

IDENTIFICATION OF COMPONENTS (continued from previous page)
25. Lance fitting
26. Lance lever
27. Nozzle
28. Reduction gear oil fill-up plug
29. Pressure adjustment knob
30. Bypass/pressure lever
31. Pump oil fill-up plug
32. Volumetric oil compensator
33. Suction fitting
34. Hook
35. Tap
WARNING
• Should one or more plates deteriorate during use, contact the Manufacturer or a
to have them restored.
• The plate (45) must be mounted on the base (9) by the
The plate (45) must only be mounted on barrows and trolleys with electric motor pumps.
NOTE.
a) Barrow/trolley ID plate.
The identification plate (6) shows the barrow/trolley model, the year of manufacture and the main technical
specifications, including the empty weight and tank capacity. It is located on the base (9).
b) Motor pump ID plate.
The identification plate (37) shows the motor pump model, the serial number, the main technical specifications
and the year of manufacture. It is located on the base of the motor pump (all versions with combustion
engine, MTP MC 20/20 and MTP MC 25 with electric motor), or on the power box (other motor pumps with
electric motor).
c) Caution plate.
The caution plate (11) points out some of the dangers there could be when using the machine. This plate is
located on the tank (16). The meanings of the pictograms used are given in the following table:
a No smoking
b Read the instruction manual
c Do not stay inside the machine's range of action
d Do not discard waste in the environment
e Do not remove the safety devices
f Do not clean or lubricate when the machine is functioning
g Do not drink! Not drinking water
d) Plate .
This machine is marked with the separate waste collection symbol regarding disposal of electrical and
electronic material (WEEE).
This means that this product must be taken to a separate waste collection centre in compliance with the
European Directive 2002/96/EC so it can be recycled or dismantled and thus reduce any impact it could have
on the environment.
For more information about this we suggest you contact your local or regional authority.
The electronic products that are not subject to separate waste collection are potentially harmful for the
environment and for human health due to the presence of hazardous substances.
36. Pressure gauge
37. Motor pump ID plate
38. Delivery fitting
39. Tap lever
40. Bypass fitting
41. Pressure accumulator
42. Filter knob with valve
43. Suction filter ring nut
44. Bag for info about the chemical product being used
45. Plate
IDENTIFICATION AND CAUTION PLATES
.
SkILLED TEChNICIAN
h Toxic products
i Corrosive products
l Wash your hands after each use
m Wear gloves
n Wear a protective mask
o Wear ear protectors
p Wear protective clothing
SkILLED TEChNICIAN
EN
31