cecotec BOLERO WASH&DRY 8580 INVERTER B Manual De Instrucciones página 107

Sound cancellation (buzzer)
Press and hold the SPEED button and the ONE TOUCH button at the same time for at least
3 seconds.
Perform the same operation to restore the sound.
D: STEAM
Press the button to add a steam wash process after the last water draining step of the
selected wash programme.
Some wash cycles cannot select the steam wash function. It can only be selected if there
is a steam icon in front of the programme name on the control panel or in the wash cycle
table.
E: DRYING
Press the button to set the drying type according to your needs and the drying type or
drying time will appear on the digital display.
Some programmes do not have a drying function.
F: DELAYED END
Press the button to set the end time of the washing programme.
G: ONE TOUCH
Press the button to set the "M-Smart" wash cycle.
H: START/PAUSE
Press and hold the button to start or pause a wash cycle.
Adding laundry during the execution of a washing programme
Once the wash cycle has started, press and hold the START/PAUSE button again. If the
DOOR LOCK indicator light
out of the drum.
To resume the wash cycle from the point where it was interrupted, close the door, and
press the button again.
WARNING: if the water level or water temperature in the drum is too high, the door lock
indicator light will come on and the door could not be opened.
I: STAINS
Press the button to select the type of soiling of the laundry, the washer dryer will
automatically adjust the most optimal way to remove the soiling.
Up to 8 types of soiling can be selected.
02770/71_BOLERO WASH&DRY 8580 INVERTER B/ INVERTER STEEL B_RP_01230629.indd 107 02770/71_BOLERO WASH&DRY 8580 INVERTER B/ INVERTER STEEL B_RP_01230629.indd 107
is off, the door can be opened, and laundry can be taken in or
BOLERO WASH&DRY 8580 INVERTER B/STEEL B
ENGLISH
107
29/6/23 16:38 29/6/23 16:38