cecotec BOLERO WASH&DRY 8580 INVERTER B Manual De Instrucciones página 13

into an earthed three-pole socket. Check carefully
and make sure that your socket is properly and
reliably earthed.
- It must be possible to disconnect the appliance
from the power supply by unplugging it if the plug
is accessible, or by means of an all-pole switch
upstream of the plug, in accordance with national
electrical safety regulations.
- The maximum current of the device is 10 A, make sure
that the power supply system (voltage, current and
cable) is applicable to the load of the device.
- Make sure that the socket outlet is capable of
supporting the Maximum Power rating of the
appliance as indicated on the rating plate.
- Water and electrical devices must be connected
by a qualified technician in accordance with the
manufacturer's instructions and local safety
regulations.
- The glass door may reach high temperatures during
operation. Keep children and pets away from the
glass door. Never open the door during the drying
stage.
- Do not operate the device in very wet rooms or in
rooms with explosive or caustic gas.
- Adequate ventilation has to be provided to avoid the
back flow of gases into the room from appliances
burning other fuels, including open fires.
- Do not dry unwashed items in the appliance.
- Do not wash items that have been soiled with
substances such as cooking oil, acetone, alcohol,
petrol, kerosene, spot removers, turpentine, waxes,
and wax removers. These should be washed in hot
02770/71_BOLERO WASH&DRY 8580 INVERTER B/ INVERTER STEEL B_RP_01230629.indd 13 02770/71_BOLERO WASH&DRY 8580 INVERTER B/ INVERTER STEEL B_RP_01230629.indd 13
BOLERO WASH&DRY 8580 INVERTER B/STEEL B
13
29/6/23 16:38 29/6/23 16:38