Publicidad
Idiomas disponibles
Idiomas disponibles
and so on.
USB interface
The left front of the vehicle is
equipped with a (5V/2A) USB
interface that can be used to
charge components such as
mobile phones.
Rear shock absorber adjustment
The rear shock absorber is
mainly composed of shock
absorber spring and spring
preload ing , wh ich can be
adjusted according to the
driver's wishes, bearing condi-
tion and road conditions, and
the side bracing frame for
motorcycle can be stabilized
when adjusting.
According to the condition of the road, in order to
increase the comfort of the driver, the spring preload-
ing can be adjusted by adjusting the nut at the upper
end of the shock absorber (figure 1). The adjusting
nut is adjusted upward, the preloading becomes
smaller, and the shock absorber is softened properly;
the adjusting nut is adjusted downward, the prepres-
sure of the shock absorber becomes larger, and the
shock absorber becomes hard properly.
Adjustment of rearview mirror
Rotating the rearview mirror
frame 1 and the mirror rod
2 can adjust the rearview
mirror angle. Adjust the rear-
view mirror frame and rod
properly until you can see the
back clearly.
Cushion Loading and unloading
Insert the key into the left
middle seat pad keyhole 1 of
the vehicle, rotate the key
clockwise, gently lift the seat
pad and push back and pull
back to remove the seat pad.
When you want to install the
cushion, push the cushion
back forward, let the hook in
the front of the cushion aim at the limit plate on the
frame, and then press the back of the cushion down
to install the cushion.
15
Publicidad
