Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions for the use of fuel and oil
Fuel
Please use unlead gasoline. Gasoline should use
gasoline with octane number 87 and above. If the
engine makes a slight detonation, it may be using a
normal grade of fuel, which should be replaced.
Notice
The use of unlead gasoline can prolong the service
life of spark plugs.
Engine oil
Please use a fully synthetic
engine oil that conforms to or
exceeds the SJ level and has
high cleanliness and high
performance. The factory
recommended model is SN
15W-50. [the loss of engine
failure caused by the pur-
chase of all synthetic oils other than our company
will affect the warranty of the vehicle]. Please go to
dealer maintenance department to buy this motor-
cycle special oil. The oil viscosity should be deter-
mined according to the temperature in the driving
area, and the appropriate oil viscosity can be
selected with reference to the diagram.
Running-in
Top-speed
For new motorcycles, during the running-in driving
period of the initial 1500km, do not overrun or sud-
denly accelerate the engine, suddenly turn and sud-
denly brake, nor can it make the speed of the
engine exceed its maximum speed by 80% in any
gear position; avoid the throttle valve body from
operating under the condition of full opening.
Engine speed change
The speed of the engine should not be fixed, but
should be changed from time to time, which helps to
match the parts.
During the running-in period, it is necessary to exert
appropriate pressure on all parts of the engine to
ensure full cooperation. But the engine cannot be
overloaded.
16
Publicidad
