Publicidad
Idiomas disponibles
Idiomas disponibles
the light source with different rated watts is used, it
may cause the overload of the circuit system and the
premature damage of the light source.
Notice
When replacing the light source, we must use the
same specification as the original car. The high
power light source will increase the load of the cir-
cuit system, and it is easy to cause battery power
loss and other faults.
ABS usage and maintenance instructions
Turn on the power lock and the ABS indicator on the
dashboard will be on (not flashing), which is normal.
When the riding speed reaches 5km/h, the ABS
indicator on the dashboard will go out, and the ABS
will be in normal working condition.
The ABS light is on (not flashing) indicating that the
ABS is in a diagnostic state.
The ABS light goes out to indicate that the ABS is in
a normal working state.
The flicker of the ABS lamp indicates that the ABS is
not working (or malfunctioning).
If you find that the ABS indicator is flashing all the
time, indicating that the ABS is not working, check
that the ABS plug- in is in place and that the ABS
wheel speed sensor and gear ring neutral are within
the 0.5-1.5mm range.
If the ABS wheel speed sensor is damaged, the
ABS indicator on the dashboard flashes and the
ABS does not work. Because the ABS wheel speed
sensor has a certain magnetic may adsorb some
metal substances, please keep the ABS wheel
speed sensor clean without foreign bodies, adhe-
sion foreign bodies will lead to ABS wheel speed
sensor damage.
Please contact Reseller Maintenance Department in
time for ABS system failure.
Storage and Guidelines
Storage Guidelines
If you want to store for a long time, it is necessary to
take certain maintenance measures to reduce the
impact of long-term storage of motorcycles on its
quality.
1. Change the oil.
2. Lubricate the drive chain.
3. As much as possible to empty the fuel tank, fuel
injection unit oil.
39
Publicidad
