Medion LINE E11916 Manual De Operación página 157

6. Gett ing started
Before using for the first time, ensure you read the "Safety
instructions" section.
6.1. Unpacking
• Select a suitable place for setting up the device before
unpacking.
• Open the box very carefully, to avoid damaging the
device. The device might get damaged if you use a
knife with a long blade to open the box.
• Completely remove the packaging material.
• The box contains a number of small items (including
batteries). Keep these out of the reach of children, as
they represent a choking hazard.
• Store the packaging material in a safe place. Only use
this box to transport the TV.
DANGER!
Risk of choking and suffocation!
Packaging film can be swallowed or
used improperly, creating a risk of suf-
focation!
 Keep packaging material such as
plastic film or plastic bags away
from children.
6.2. Mounting
Attach the stand as shown in the illustration. Carry out this
step before connecting the LCD TV.
MD20058 / MD20059:
3 x ST4 x 10
3 x ST4 x 12
MD20113 / MD20114:
6.3. Inserting the batt eries in the
remote control
 Remove the battery compartment cover on the back
of the remote control.
 Insert two LR03 (AAA) 1.5 V batteries in the battery
compartment of the remote control. Check the battery
polarity (see label on the bottom of the battery com-
partment).
 Close the battery compartment.
PLEASE NOTE!
Risk of damage!
The remote control can be damaged
by leaking batteries if not used for a
long period of time!
 Remove the batteries from the re-
mote control if the device is not go-
ing to be used for a long period.
6.4. Connecting the antenna
Your LCD TV supports different antenna signals. You
can input the following image signals to the television
through the socket labelled R F :
• Via analogue cable/an analogue house aerial
• Via a DVB-T/DVB-T2 1 antenna or
1
• Via a DVB-C connection
 Insert the antenna cable either from the house aerial/
analogue cable connection, a DVB-T antenna or the
DVB-C connection in the antenna socket on the LCD
TV.
You also have the option of connecting a digital satellite
system to the socket labelled L N B I N .
 Screw a coaxial antenna cable's F connector onto the
connector on the LCD TV.
If you want to watch encrypted channels, or
subscription channels, you must use a suitable
card. Insert a CAM module (available in specia-
list shops) in the slot provided for this purpose
on the left-hand side of the device (C O M 
M O N I N T E R F A C E ). You can then insert
your provider's card in the CAM module.
This service must be available in your region
EN
11