Medion LINE E11916 Manual De Operación página 159

Menu option
SYMBOL RATE
Set the symbol rate.
(only in DVB-C
mode)
SORTING BY
Logical Channel Numbering: Select
LCN the ON setting if you want to sort the
channels based on a preset channel
list (if available from the channel sup-
plier)
 After you have configured all the settings, press O K .
The channel search will then start.
6.8.2. Satellite
Tuning Setup
Tune Type
Digital Type
Satellite
Scan Mode
Channel Type
Service Type
Load Presetlist
Dish Setup
MENU Back
Menu op-
tion
TUNE TYPE
No settings can be entered here in Satel-
lite mode.
Use the direction buttons to select the
DIGITAL
connection type (DVBT, DVBC or SAT
TYPE
ELLITE).
SATELLITE
Select the satellite on which the search
will be started.
SCAN MODE Set the search mode.
DEFAULT: A search will be carried out on
the selected satellite, based on the tran-
sponder list saved for this satellite. This
requires a little time.
NETWORK: Activate/deactivate the net-
work scan.
BLIND SCAN: A complete search will
be carried out on the selected satellite.
This will also take into account new tran-
sponders that have not been added to
the list of transponders. Two searches are
carried out with the blind scan. The first
search identifies the transponders for the
satellite, while the second search locates
the channels. The blind search takes the
longest time.
CHANNEL
Decide which channels you want to
TYPE search for: FREE (available channels),
SCRAMBLED (encrypted channels) or
FREE+SCRAMBLED (available and en-
crypted channels).
Setting
DTV
Satellite
01 HOTBIRD 6,7A,8
Network
Free+Scrambled
All
OK
OK
OK Start
Setting
Menu op-
tion
SERVICE
Select the channel type.
TYPE
DTV: Search for digital TV channels.
RADIO: Search for digital radio stations.
ALL: Search for digital TV channels and
digital radio stations.
LOAD PRE The preinstalled channel list for the Astra
SETLIST
19.2E satellite is loaded. This search mode
takes the least time. Select YES to load
the channel list. Select NO to start the
channel search.
DISH SETUP You can configure the same settings
here as in the CHANNEL > DISH SETUP
menu option.
 After you have configured all the settings, press O K .
The channel search will then start.
Channel Tuning
TV :
DTV :
Radio :
Data :
10892 MHz
Please press MENU key to exit
The device will now search for the different types of
channels in sequence. Wait for it to finish. You can quit
the search process prematurely by pressing the M E N U
button.
The initial installation described here corre-
sponds to the FIRST TIME INSTALLATION
option in the OPTION menu.
Setting
0 Programme
0 Programme
0 Programme
0 Programme
ASTRA 1H,1KR,1...
EN
13