Medion LINE E11916 Manual De Operación página 164

– SERVICE TYPE
Select the channel type.
DTV: Search for digital TV channels.
RADIO: Search for digital radio stations.
ALL: Search for digital TV channels and digital
radio stations.
– LOAD PRESETLIST
The preinstalled channel list for the Astra 19.2E
satellite is loaded. This search mode takes the
least time. Select YES to load the channel list.
Select NO to start the channel search.
After you have configured all the settings, press O K . The
channel search will then start.
ATV MANUAL TUNING
(only in ATV and DTV modes)
You can programme individual analogue channels manu-
ally here.
– CURRENT CH
Select the channel number for which you want
to carry out a search.
– COLOUR SYSTEM
PAL, SECAM, AUTO
– SOUND SYSTEM
BG, I, DK, L.
– FINETUNE
Carry out the fine tuning with 
– SEARCH
Start the search with 
DTV MANUAL TUNING
(only for DVB-T)
You can programme individual channels in DVB-T mode
manually here if the input signal is received via the anten-
na.
This option is only available if you have previously select-
ed DTV as the input source.
– VHF / UHF
Select the channel to be searched. Press O K
to start the search. The signal quality will be
shown on the bar underneath.
– DTV
The number of digital TV channels found is
displayed.
– RADIO
The number of digital radio stations found is
displayed.
– DATA
The number of data channels found is dis-
played.
DTV MANUAL TUNING
(only for DVB-C)
You can programme individual channels in DVB-C mode
manually here if the input signal is received via cable.
This option is only available if you have previously select-
ed DTV as the input source.
– FREQUENCY
Set the search frequency with  or the
number buttons on the remote control.
18
– SR
Set the symbol rate.
– QAM TYPE
Set the modulation.
– DTV
The number of digital TV channels found is
displayed.
– RADIO
The number of digital radio stations found is
displayed.
– DATA
The number of data channels found is dis-
played.
PROGRAM EDIT
You will see the currently saved channels here. You can
change the following settings for each channel.
– DELETE
Select the channel that you want to delete and
press the red button [P R O G R A M ]. The se-
lected channel is then deleted.
DVB-T/C: If the SORTING BY LCN function
has been activated, the channel number will
also be deleted when the channel is deleted.
In order to avoid this happening, deactivate
this function under AUTO TUNING.
– RENAME (only for ATV)
Select the channel that you want to rename
and press the green button [INTRO].
You can now change the first letter: scroll up
and down through the set of characters using
the direction buttons .
Move to the next and subsequent letters using
the direction button .
When finished, press the green button [IN-
TRO] again to save the name.
– MOVE
Select the channel and press the yellow
button [R E P E A T ]. Use the  buttons to
move the channel to the desired position and
press the yellow button [R E P E A T ] again.
The other channels will be rearranged accord-
ingly. Alternatively, you can use the number
buttons on the remote control to enter the
channel number to which the channel should
be moved. Then press the O K button. The
channel will then be moved to the desired
channel number. If the SORTING BY LCN
function has been activated, the channel
number will also be moved. In order to avoid
this happening, deactivate this function under
AUTO TUNING.
– SKIP
Select the channel that you want to skip when
scrolling through the channels using the
P+/- buttons and then press the blue button
[A  B ].
You can still select this channel via the number
buttons.