Parkside PWSA 20-Li D4 Traduccion Del Manual De Instrucciones Originale página 27

that the product is passed on, hand over
all documents to the third party.
Intended purpose
The­cordless­angle­grinder­is­a­tool­(de-
vice) for cutting, grinding, roughing or
brushing metal, stone and wood materials,
plastic, tiles and non-ferrous metals without
using water.
The­device­is­not­intended­for­any­other­
types of applications (e.g. grinding with
unsuitable grinding tools, grinding with a
coolant solution, grinding or cutting hazar-
dous materials such as asbestos).
The­device­is­intended­to­be­used­by­do-it-
yourselfers. It was not designed for heavy
commercial­use.­The­tool­is­to­be­used­by­
adults.­Children­over­the­age­of­16­may­
not use the tool except under supervision.
The­manufacturer­is­not­liable­for­damages­
caused by an improper use or incorrect
operation of this device.
The­device­is­part­of­the­Parkside­
X 20 V TEAM­series­and­can­be­opera-
ted­using­Parkside­X 20 V TEAM­series­
batteries.­The­batteries­may­only­be­
charged using chargers from the Parkside
X 20 V TEAM­series.
General description
­The­illustration­of­the­principal­
functioning parts can be found
on the front and back foldout
pages.
Extent of the delivery
Carefully­unpack­the­appliance­and­check­
that it is complete:
-­ Cordless­Angle­Grinder
- Handle
- Attachment, guard cover
-­ Chuck­key
-­ Cutting­disc
- Instructions for use
The rechargeable battery and
charger are not included in
delivery.
Description of function
The­cordless­angle­grinder­is­a­tool­(de-
vice) for cutting, grinding, roughing or
brushing metal, stone and wood materials,
plastic,­tiles­and­non-ferrous­metals.­There­
is a special disc for each of the separate
applications. Please refer to the informati-
on from the disc manufacturer.
Please refer to the descriptions below for
information about the operating devices.
Overview
1 Handle
2­ Threads­for­handle
3 On/Off switch
4 Battery release button
5 Rechargeable battery
6 Speed regulator
7 Guard cover
8­ Cutting­disc
9 Spindle stop button
10­ Chuck­key
11 Attachment, guard cover
­ 12­ Mounting­fl ­ ange
­ 13­ Clamping­nut
14 Uptake spindle
15 Disc
16 Screw
17 Notch
GB MT
27