Parkside PWSA 20-Li D4 Traduccion Del Manual De Instrucciones Originale página 32

GB MT
5) Careful handling and use of
battery devices
a) Charge the batteries only in
chargers that are recommended
by the manufacturer. Risk­of­fi ­ re­if­
a­charger­that­is­suitable­for­a­specifi ­ c­
type of battery is used with other bat-
teries.
b) In the power tools, use only the
batteries designed for the pur-
pose.­The­use­of­other­batteries­may­
result­in­injuries­and­risk­of­fi ­ re.
c) Keep the unused battery away
from paper clips, coins, keys,
nails, screws and other small
metal objects, which could
cause bridging of the contacts.
A short circuit between the battery con-
tacts­may­cause­burns­or­fi ­ re.
d) If used incorrectly, liquid may
leak from the battery. Avoid
contact with this. In the event of
accidental contact, rinse off with
water. If the liquid gets into eyes,
seek medical assistance. Leaking bat-
tery­fl ­ uid­may­cause­skin­irritations­or­
burns.
6) Service
a) Have your power tool serviced
by a qualifi ed repair person us-
ing only identical replacement
parts. This­will­ensure­that­the­safety­
of the power tool is maintained.
b) Never repair damaged batter-
ies. All battery repairs should be car-
ried out by the manufacturer or author-
ised customer service centres only.
32
Safety instructions for all
applications
Common safety instructions for
grinding, working with wire bru-
shes and cutting grinders:
• This electric tool is to be used as
a grinder, wire brush and cutting
grinder. Follow all safety instruc-
tions, directives, illustrations and
facts which you receive with the
device. If you do not follow these inst-
ructions,­an­electrical­shock,­fi ­ re­and/or­
serious injury may occur.
• This electric tool is not suitable
for sanding and polishing. Using
the electric tool in ways for which it is
not intended may cause hazards and
injuries.
• Do not use any accessories that
are not specifi cally intended and
recommended for this electric
tool by the manufacturer. Simply
because an accessory can be attached
to your electric tool does not guarantee
safe operation.
• The allowable rotation speed
of the attachment tools must be
at least as high as the highest
rotation speed indicated on the
electric tool. Accessories that run fas-
ter than the allowable speed can break
and­fl ­ y­apart.
• The outside diameter and thick-
ness of the attachment tool must
correspond to the dimensions
indicated for your electric tool.
Attachment tools which are wrongly
dimensioned­cannot­be­suffi ­ ciently­
shielded or controlled.
• Attachment tools with threaded
attachment must fi t the threa-
ding of the grinding spindle ex-