Parkside PWSA 20-Li D4 Traduccion Del Manual De Instrucciones Originale página 30

GB MT
General Safety Directions
for Power Tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock,­fi ­ re­and/or­severe­injuries.
Retain all safety directions and in-
structions for future use.
The­term­„power­tool"­in­the­warnings­
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).
1) Work area safety
a) Keep work area clean and well
lit. Cluttered­or­dark­areas­invite­ac-
cidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of fl ammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2) Electrical safety
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmodi-
fi ­ ed­plugs­and­matching­outlets­will­
reduce risk of electric shock.
30
b) Avoid body contact with
earthed or grounded surfaces,
such as pipes, radiators, ranges
and refrigerators.­There­is­an­in-
creased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to
rain or wet conditions. Water
entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never
use the cord for carrying, pull-
ing or unplugging the power
tool. Keep cord away from
heat, oil, sharp edges or mov-
ing parts. Damaged or entangled
cords increase the risk of electric
shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a
damp location is unavoidable,
use a RCD (Residual Current De-
vice). Use­of­an­RCD­reduces­the­risk­
of electric shock.
3) Personal safety
a) Stay alert, watch what you are
doing and use common sense
when operating a power tool.
Do not use a power tool while
you are tired or under the infl u-
ence of drugs, alcohol or medi-
cation. A moment of inattention white
operating power tools may result in
serious personal injury.
b) Use personal protective equip-
ment. Always wear eye protec-
tion. Protective equipment such as
dust mask, non-skid safety shoes, hard