YATO YT-07140 Manual página 14

EN
corrosive agents, alcohol or solvents to clean the device. Remove the hoses from the pump and gravitationally
remove any residual oil from the pump. Press and hold the end of the quick disconnect coupling and then
remove the hose (VI). Loosen the hose clamp by turning the screw counterclockwise, remove the hose. Store
hoses in tightly sealed plastic packaging resistant to engine oil. This will prevent contamination from oil resi-
dues. Store the product disassembled in dry, shaded and well-ventilated places. Ensure that the storage room
protects the device from unauthorised access, especially by children. It is recommended to store and transport
the product in the packaging it was delivered in.
14
M A N U A L O R I G I N A L