Publicidad
Idiomas disponibles
Idiomas disponibles
Draining the Lubricating Oil
1. Open the enclosure, create access.
2. Place a suitable container below the oil drain.
3. Open the drain valve and allow oil to drain out completely.
Dispose of the lubricating oil.
4. Close the drain valve.
5. Close the enclosure.
Remove the Air Filter
Remove all filter elements and filter mats. Dispose of filter
elements and filter mats.
•
Air filter cartridge
•
Filter mat
•
Switch cabinet cooling air inlet filter
•
Control air filter
EN-16
RELEASED 02/Nov/2023 21:18:09 GMT
6.4
The compressor must be dismantled and removed by technicians.
The applicable local safety and environmental protection
regulations must be complied with.
When disposing of materials that are hazardous to health, the
instructions on the corresponding Safety Data Sheets must be
followed.
Packaging materials, cleaning agents, and used or residual
consumables must be fed to recycling in accordance with the
regulations applicable at the installation site.
DISPOSAL
47794362 Rev.A
Publicidad
