Publicidad
Idiomas disponibles
Idiomas disponibles
1
INTRODUCTION
1.1
SCOPE AND TARGET AUDIENCE
This manual's intent is for electricians and operators for site
planning, installation and operation guidelines for the compressor.
These operating instructions contain all of the documentation
required for safe operation and maintenance of the compressor. This
includes installing and connecting the compressor, commissioning
and operating the compressor.
Safety Requirements
In addition to all the other information in these operating
instructions, the general safety instructions are located in the Safety
Manual and must absolutely be read.
For supporting documentation, refer to Product Manual table
below.
Product Manuals
Safety Manual
Parts List Manual (2475)
Parts List Manual (2545 / 7100)
Product Information Manual
1.2
NOTES
General Notes
The operating instructions must be read and applied by any person
assigned to work with and on the compressor.
It is strongly recommended the controller manual be read prior to
operating the compressor package.
Regardless of these operating instructions, the laws, regulations,
directives, and standards in force in the installed location and the
country of use must be followed.
Training
Operator training at site is performed by authorized service
technicians. These operating instructions serve as training
documents, along with the repair instructions, which are provided
only in conjunction with service training.
These measures ensure that the assigned work can be completed
reliably.
Guarantee
Ingersoll Rand is not liable for the functional safety of the
compressor if any actions are taken that are contrary to the
intended use, or if used for any other purpose than those listed in
the operating instructions.
Ingersoll Rand refuses any guarantee or liability for cases of:
•
Operating errors.
•
Use of the compressor other than as intended.
•
Damages resulting from foreseeable misuse or failure to follow
the operating instructions.
•
Damages or injuries caused by third party components.
•
Use of replacement or wear parts or consumable materials that
are not provided or recommended by Ingersoll Rand.
•
Inadequate maintenance. Modifications to the compressor.
The guarantee and liability conditions of the general terms and
conditions of Ingersoll Rand are not expanded by the notes above.
47794362 Rev.A
RELEASED 02/Nov/2023 21:18:09 GMT
47794363
47794360
47794359
47794361
Warranty
The conditions of the Ingersoll Rand Warranty are set out in the
company's Standard Limited Warranty statement, provided with the
machine documentation package.
Register the Unit to activate the warranty by
completing the online warranty registration at:
www.IRrecip.com
USE ONLY Ingersoll Rand GENUINE PARTS. USING NON-
GENUINE PARTS FOR SERVICING OR REPAIRS WHILE THE
COMPRESSOR IS WITHIN THE WARRANTY PERIOD WILL
INVALIDATE YOUR WARRANTY.
Copyright
These operating instructions are subject to copyright law and may
be used solely for the agreed purpose, that is, as a reference for
internal purposes.
Propagation or reproduction of this document, or the sale and
impartation of its contents, are prohibited unless expressly allowed.
Infringement is liable to compensation. All rights are reserved with
respect to registration of a patent, utility patent, or design patent.
Resale
If the compressor is resold, these operating instructions must
be provided to the new operator along with the compressor. If
necessary, the operating instructions must be reordered from
Ingersoll Rand by providing the order confirmation number. The
compressor may not be resold without these operating instructions
in any case.
1.3
INTENDED USE
The compressor uses the best available technology and meets
applicable safety requirements at the time of sale, in the context of
correct usage.
The design cannot prevent foreseeable misuse, nor all other residual
risks, without limiting the functionality of correct usage.
The compressor is designed for the compression of atmospheric air
(compressed air for driving pressure equipment). The compressor is
not suitable for the compression of other gases.
The compressor is considered to be used correctly if the following
points are also covered:
•
The compressor is used in accordance with these operating
instructions.
•
The operator's work procedures and operating instructions are
followed.
Any other use, or use exceeding these limits, is considered to be
improper. The manufacturer is not liable for any resulting damages.
The user alone bears the entire risk.
Correct usage also includes following the operating instructions and
complying with the inspection and maintenance instructions.
EN-3
Publicidad
