Lukas e3 CONNECT Manual De Instrucciones página 27

4.2. REMOVING THE BATTERY
Release the lock and remove the battery (figure B)�
4.3. QUERYING THE BATTERY STATUS
Press the query button on the battery (figure C)� Note also the separate instruc-
tions for the battery�
4.4. FLASHLIGHT FUNCTION OF THE BATTERY
To switch on the flashlight, press the query button on the battery twice in quick
succession (Figure C�)� To switch it off, press the query button again� The flash-
light function automatically switches off again after a while�
4.5. SWITCHING ON AND OFF
To switch on, press the main switch (Figure M; No� 1)� The device is ready to op-
erate when the main switch and workspace lighting are illuminated blue� To switch
off, the main switch must be pressed for three seconds�
4.6. ACTUATING THE STAR GRIP VALVE
The working action is triggered by turning the star grip valve� (Figure D)� Every
rescue device has a deadman function� When the star grip is released, it returns rescue device has a deadman function� When the star grip is released, it returns
to the center/neutral position automatically� This ensures the load is retained� to the center/neutral position automatically� This ensures the load is retained�
4.6.1. CUTTING
Turn the star grip valve in the closing direction� (Figure E)�
Position the cutter as perpendicular as possible to the object to be cut (Figure F)�
Cut close to the pivot point of the blade (Figure G)�
4.6.2. SPREADING
Turn the star grip valve in the opening direction (Figure H)�
Open a small gap at the start, then insert the spreader tips as far into the gap as
possible� Do not spread with the aluminum arms! (Figure J)�
4.6.3. PULLING
Secure the traction device in the attachment / bolt hole (page 2; figure I; number 6)
or on the spreader tips� Actuate the star grip valve in the closing direction�
(Figure E)� Note the separate instruction manual for the traction device�
4.6.4. SQUEEZING
Only squeeze in the squeezing area and with the squeezing plates of the spread-
er arms (Figure K)� Actuate the star grip valve in the closing direction� (Figure E)�
4.6.5. PEELING
Special peeling tips are needed for peeling (Figure L)� Actuate the star grip valve
in the opening direction� (Figure H)�
4.6.6. PUSHING
Place the rescue rams between the object to be pushed and actuate the star grip
valve in the extending direction� (Figure H)�
de
en
fr
es
pt
it
nl
da
sv
fi
el
Every
pl
cs
sk
hu
ro
bg
sl
hr
et
lv
lt
zh
ko
ja
ar
27