Lukas e3 CONNECT Manual De Instrucciones página 34

Fault
de
Rescue device
en
moves slowly
when operated
fr
es
pt
Turbo function not
available
it
nl
da
sv
fi
Cylinder pistons
do not move when
el
operated
pl
cs
sk
Device doesn't
hu
perform at its
given power�
ro
bg
sl
Following release,
the star grip
hr
doesn't return to
the central/neutral
et
position
lv
lt
zh
Hydraulic fluid
ko
leakage on the
piston rod
ja
ar
34
Check
Temperature of
device and battery
below -10°C
Check charging
state display
Ambient tempera-
ture low
Warning light for
electronics tem-
perature lights up
Battery fully
charged?
Main switch illumi-
nated?
Casing damaged
or star grip oper-
ation not working
smoothly?
Cause
Cold ambient
temperature
Rechargeable bat-
tery almost dead
Changeover pres-
sure reached
Electronics tem-
perature too high
Battery dead
Battery defective
Device defective
Device defective
Damage to the
torsion spring for
reset
Soiled valve or
star grip
Defective valve
Other mechanical
damage (e�g� star
grip)
Defective rod seal
Damage to the
piston
Solution
Use devices nor-
mally, device will
warm up with use
Recharge the
battery or use
another battery
Use devices nor-
mally, device will
warm up with use
Perform move-
ment without turbo
function
Perform move-
ment without turbo
function
Charge battery
Replace battery
Repair by an
authorized dealer,
by personnel
specially trained
by LUKAS, or by
LUKAS itself
Repair by an
authorized dealer,
by personnel
specially trained
by LUKAS, or by
LUKAS itself
Repair by an
authorized dealer,
by personnel
specially trained
by LUKAS, or by
LUKAS itself
Repair by an
authorized dealer,
by personnel
specially trained
by LUKAS, or by
LUKAS itself